Global Market of Solar Cell Paste foretoken USD 7,328 Million by 2026
Solar Cell Paste Introduction
Solar cell paste is an electronic paste used to produce crystalline silicon solar cells. It can be divided into a front sol slurry, a back-silver paste and an aluminum paste. The front conductive paste collects the electricity generated by the solar cells, and then pastes the collected energy to the system. This slurry has a crucial influence on the conversion efficiency of the battery and therefore plays an important role in the performance cost ratio of the crystalline silicon solar cell. These conductive pastes account for 30% to 40% of the cost of manufacturing a single solar cell, and any small change in the slurry will have an impact on conversion efficiency.
Scope of Solar Cell Paste Market
This
report studies the Solar Cell Paste market from the
perspectives of enterprises, regions, product types and terminal industries, and
forecasts the market through the analysis of the status quo. In this study,
2018 has been considered as the base year and 2019 to 2016 as the forecast
period to estimate the market size for solar cell paste.
The Solar Cell Paste market is anticipated to be USD 1,645 million in 2019 and is projected to reach USD 7,328 million by 2026, growing at a CAGR of 23.79% in the forecast time period.
Get Free Sample at:
Key participants
Key global participants in the Solar Cell Paste market include Dupont, Heraeus, Noritake, Giga Solar, Namics, Dongjin, Monocrystal, Cermet, Exojet, Daejoo, AgPro, Xi’an Chuanglian, Wuhan Youleguang, EGing, Ruxing, Leed, Toyo Aluminium, ThinTech, Hoyi Tech, Tehsun, and etc.
Geographical Perspective
From a geographical perspective, the global solar cell paste market is spread across Asia-Pacific, North America, Europe, Latin America, and the Middle East & Africa. In 2018, the global solar cell paste market was mainly concentrated in the three regions of Asia-Pacific, North America and Europe, with the market share of 26.38%, 34.82% and 29.66% respectively, accounting for a total of 90.86%. The Asia Pacific is projected to lead the global solar cell paste market in the forecast period, as the investment in solar power is increasing in China and India. The solar cell paste market in North America and Europe is likely to expand at a rapid pace over the forecast period. Latin America and Middle East & Africa are predicted to account for a modest share of the global solar cell pulp market during the analysis period.
Purchase this report:
Type Synopsis
In terms of type, the solar cell paste market can be divided into aluminum (Al) solar cell paste, front-side silver (Ag) solar cell paste, and back-side silver (Ag) solar cell paste. Aluminum (Al) solar cell paste is applied to the back side of the solar cell, which helps to create a uniform, high quality back surface field for single crystal and polycrystalline solar cells. Uniform back surface fields and good adhesion of solar wafers produce better efficiency than other commercially available solar pastes. Aluminum solar cell paste delivers low bowing, excellent efficiency, high material compatibility, and better adhesion. The formulation of the paste can also be customized.
Silver solar cell paste is divided into front side and back side. Front side silver solar paste is ideal for lightly doped emitter design. It offers fine line resolution and good aspect ratio. Front side silver solar paste has high adhesion capacity and high soldering capacity. It captures high efficiency and has wider processing window. The paste is used in a wide range of sheet emitter wafers. Back side silver solar paste offers good soldering capacity and lowers material consumption in solar PV cell manufacturing. The paste is highly compatible with silicon wafers and has high adhesion and can be formulated with pre-silver and back aluminum paste.
Application Synopsis
The Solar Cell Paste Market by application are Direct Sales, Distributor, and Other.
Table of Content
1 Report Overview
1.1 Product Definition and Scope
1.2 PEST (Political, Economic, Social and Technological) Analysis of Solar Cell Paste Market
…
2 Market Trends and Competitive Landscape
3 Segmentation of Solar Cell Paste Market by Types
4 Segmentation of Solar Cell Paste Market by End-Users
5 Market Analysis by Major Regions
6 Product Commodity of Solar Cell Paste Market in Major Countries
7 North America Solar Cell Paste Landscape Analysis
8 Europe Solar Cell Paste Landscape Analysis
9 Asia Pacific Solar Cell Paste Landscape Analysis
10 Latin America, Middle East & Africa Solar Cell Paste Landscape Analysis
11 Major Players Profile
11.1 Dupont
11.1.1 Dupont Company Profile and Recent Development
11.1.2 Market Performance
11.1.3 Product and Service Introduction
11.2 Heraeus
11.3 Noritake
11.4 Giga Solar
11.5 Namics
11.6 Dongjin
11.7 Monocrystal
11.8 Cermet
11.9 Exojet
11.10 Daejoo
11.11 AgPro
11.12 Xi’an Chuanglian
11.13 Wuhan Youleguang
11.14 EGing
11.15 Ruxing
11.16 Leed
11.17 Toyo Aluminium
11.18 ThinTech
11.19 Hoyi Tech
11.20 Tehsun
Ask for a discount at:
Target Audience:
Solar Cell Paste manufacturers
Raw material suppliers of Solar Cell Paste
Distributors and resellers of Solar Cell Paste
Solar Cell Paste industry associations
Product managers, Solar Cell Paste industry administrator, C-level executives of the industries
Market research and consulting firms
Small and Medium-sized Enterprises (SMEs)
Contact Info:
Global Market Monitor
One Pierrepont Plaza, 300 Cadman Plaza W, Brooklyn,
NY 11201, USA
Phone: + 1 (347) 467 7721
Email: info@globalmarketmonitor.com
Web Site: https://www.globalmarketmonitor.com
We provide more professional and intelligent market reports to complement your business decisions.