REPORTS

APET (Amorphous-polyethylene terephthalate) film is thermoplastic film which is produced by the extrusion processing of Polyethylene Terephthalate (APET) copolymer, a kind of thermoplastic polyester. APET Film is one kind of amorphous thermal plastics, which is composed of carbon, hydrogen and oxygen elements. It will not produce toxic gases in the...

Thermal Transfer Ribbons is a printer consumable, which is a polyester or other high-density film coated on one side with a wax-based, resin-based or mixed ink. The ink-free side is coated with a lubricant to prevent wear and damage to the print head. The core of the ribbon is usually made of paper or plastic, and the main requirements are that it ...

Sodium petroleum sulfonate refers to a black brown translucent liquid that soluble in water, which is extracted from petroleum oil fraction by sulfonation, alcohol water extraction and sodium salt saponification, and then refined finally. The worldwide market for Sodium Petroleum Sulfonate is expected to grow at a CAGR of roughly 5.1% over 2020-202...

The plastic straps market has been segmented into polyester straps, polypropylene straps, nylon straps, and others (paper straps, composite straps, and cable woven straps). These straps are used in different end-use industries such as paper, cotton, fiber, and bricks and tiles. The plastic strap market is expected to grow to USD 3.7 billion by 2023...

Extruded polystyrene foam is a material formed by continuous extrusion with special technology. The hard film formed on the surface of extruded polystyrene foam is even and flat, while the completely closed foams inside are continuous and uniform, showing a honeycomb structure. Extruded polystyrene foam has the characteristics of high pressure resi...

High-pure hydrochloric acid is a pure aqueous hydrochloric acid solution. The acid is highly volatile, toxic, corrosive, etc., and has a pungent odor, so it easily reacts with most metals and metal oxides. Hydrogen and chlorine are the main raw materials for acid. The global high-pure hydrochloric acid market is valued at US$124 million in 2019 and...

Hydroprocessing Catalysts (HPC) refers to a high technical barrier market with limited suppliers. Market concentration is high. Hydroprocessing Catalysts (HPC) are considered to be important catalysts in refining industry. The global Hydroprocessing Catalysts (HPC) market size is expected to gain growth with a CAGR of 3.4% in the forecast period of...

N-bromosuccinimide (NBS) is a chemical reagent used in radical substitution and electrophilic addition reactions in organic chemistry. NBS may be considered as a source of cationic bromine. The global N-Bromosuccinimide market size is expected to reach USD 22 million by the end of 2026, with a CAGR of 1.2% during 2020-2026. The materials and chemic...

Phosphor bronze is a kind of bronze with tin and phosphorus as the main alloying elements, and it is mainly used as wear resistant parts and elastic components. Phosphor bronze can be used to make computer connectors, mobile phone connectors, high-tech industry connectors, electronic springs, switches, slots for electronic products, keys, electrica...

PUR adhesive are a more recent development for perfect binding and are largely different from the EVA and SBR (styrene butadiene rubber) hot melts. They polymerize when applied so that they form much stronger bonds than traditional hot melts. They also possess superior flexibility and can withstand a larger range of temperatures. The global PUR hot...

Metal cleaning chemicals are used to wash away excess organic and inorganic materials from metal surfaces. They are used to remove unwanted substances, oils, greases, particles, corrosive oxides and other impurities to prevent damage and maintain performance efficiency. The metal cleaning chemicals market is expected to grow at a CAGR of 5.8% from ...

Oxford Instruments Plcductors are materials that allow the passage of electricity with zero resistance at their critical temperature. In 2019, the global superconductor market size is approximately 7.6 billion U.S. dollars, and is expected to reach 14 billion U.S. dollars by 2026, with a CAGR of 9.12%. The demand for advanced grid infrastructure an...

Ceramic fiber has become the main substitute for asbestos due to its unique insulating properties. These fibers are characterized by low density and low thermal inertia. Control the temperature inside the heating furnace and emit very little heat from the heating furnace. Ceramic fibers can be used in a variety of applications, even in corrosive an...

Plastics for Barrier Packaging has the characteristics of strong barrier ability, long warranty time, high compressive strength and fall resistance, and tensile resistance, and can be widely used in food and beverage packaging, chemical industry and pharmaceutical industry. Plastics for Barrier Packaging has a strong ability to prevent the entry of...

Fragrance fixatives are natural and synthetic intermediate chemicals used to balance the vapor pressure or volatility of raw materials used in perfumes and improve toughness. By 2026, the fragrance fixatives market is expected to reach US$2.8 billion, with a CAGR of 4.80% during the forecast period from 2020 to 2026. With the continuous development...

Neotame is a functional sweetener that is very close to aspartame in nature. It has a pure sweet taste, without the bitter or metallic taste often associated with other powerful sweeteners. The nutrients contained in Neotame are easily absorbed by the body. Neotame will not cause tooth decay and blood sugar fluctuations, so it is the preferred swee...

Potassium carbonate exists in the form of white powder or water-soluble granules. When mixed with water, a strong alkaline solution is formed. Potassium carbonate is an aqueous solution of potassium hydroxide. It is known to be the main component of potassium salt and refined pearl ash or tartar. Potassium carbonate is formed through the process of...

Cationic dyes, also known as basic dyes, are soluble in water and are mainly applied to acrylic fibers or paper together with acetic acid to support the absorption of the dye into the material. Cationic dyes can produce bright colors on textiles. It is expected that in the future, the global cationic dyes market will grow substantially and achieve ...

M42 high speed steel is high cobalt toughness high speed steel. It is mainly used for high toughness precision wear-resisting hardware cold punching die, and also for cooling in cutting tools and knives. The hardness of M42 high speed steel can be up to 70HRC. M42 high speed steel has excellent grinding performance, so it can be used to manufacture...

The concept of recovering oil by surfactant flooding dates back to 1929 when De Groot was granted a patent claiming water-soluble surfactants as an aid to improve oil recovery. Currently, surfactant flooding boosts oil production by lowering interfacial tension, increasing oil mobility thus allowing better displacement of the oil by injected water....